How Diamond Saw Blade Works

Each and every Diamond blade has its own specific and unique application and every blade reacts differently under various circumstances. Being found in hundreds of different varieties, types, bond types, and manufacturing methods, they have their own use. Blades which are ultra thin & of high precision, they are used for Slicing, Dicing, Wafering, Cut-off, Singulation, Grooving, Slotting, Cross Sectioning, Sample Preparation, Gang Sawing, Slabbing, Rough Cutting applications.

In simple words it is a cutting tool which has exposed diamond particles captured in a metal matrix each with a small cutting edge.

§  Diamond blades are usually made with a steel core or completely impregnated with diamond.

§  During the diamond cutting operation, the surface speed may reach 30 m/sec, if using a high speed diamond cutting saw.

§  The cutting action is performed by accumulation of small chips scratched out by the numerous diamond particles impeded in the bond.

§  The number of cutting edges which is determined by the number of diamonds makes up the structure of the diamond blade, along with its matrix, metal or nickel bond. 

§  The size of the diamond particle will have a direct result in the size of chip we can obtain. The thickness of the diamond blade (diamond particle plus matrix) will determine the width of the cut.

Therefore, diamond blade selection along with feed rate, cutting speed, and depth of cut will ultimately determine your diamond sawing success.

Our diamond blades have the following advantages:

·         Minimal Chipping

·         Faster Cutting Action

·         Minimal Cutting Noise

·         Minimal Loss of Material